ponti-sollevatori-mirach-sirius

MIRACH / SIRIUS

Low profile and two versions: floor-mounted or recessed.
Lifting capacity of 4000Kg or 5000Kg.
Platform length of 4600mm or 5000mm.
Platform that integrates towers, sliding plates, and turntables.
The pit depth is only 210 mm and the minimum lift height is only 200 mm.
Offered in 3 different versions: Setup with towers (WLT), Simple setup (WL), and Service with flat platform (S).

High profile and two versions: floor-mounted or recessed.
Lifting capacity of 4000Kg or 5000Kg.
Platform length of 4600mm or 5000mm.
Completely flat platform that integrates towers, sliding plates, and turntables.
The floor-mounted model with integrated ramps has a minimum ground height of 255mm.
For the recessed model, the pit depth is only 260 mm and the minimum height of the lift is only 255 mm.
The Alignment version (WLT) integrates the towers.

mechanical safety system.

Lever (A) to ensure that the lift at minimum height does not require high hydraulic pressure.
Mechanical safety system (B)

Double Master (1) & Slave (2) cross system that allows not to have the

The wheel alignment version has a front sliding plate that can be locked in the center with a pin.

The sliding plate can be moved 50mm to the right or left and can rotate by 3 degrees.

The lifter has two bases: (1) a rear one and (2) a front one.

All bases are adjustable with screws (3) up to 25 mm.

The movable scissor (4) is on rollers (5), with less friction and less noise.

The locking of the sliding plates is pneumatic (optional).

The cylinder locks the plate each time in the central position.

Long recess with cover for the turntable, suitable for small and large vehicles.

Towers with lifting capacity of 4000Kg or 5000Kg, with lifting height of 470mm or 520mm.

The extensions are 1475mm, 1825mm and 2375mm.